74LS11 Triple 3-input AND gate

The 74LS11 holds three independent 3-input AND gates. Each output is high only when all three of its inputs are high.

74LS11 pinout

VCC1A1C1B1Y2A3C2B3B2C3A2Y3YGND141132123114105968774LS11

Top view of the 14-pin DIP package. Pin 1 is at the bottom left, beside the notch, and the numbers run anticlockwise. Power is on pin 14 (VCC, +5 V) and pin 7 (GND).

PinNameTypeWhat it is
11AInputInput of gate 1
21BInputInput of gate 1
32AInputInput of gate 2
42BInputInput of gate 2
52CInputInput of gate 2
62YOutputTotem-pole output
7GNDGround0 V
83YOutputTotem-pole output
93AInputInput of gate 3
103BInputInput of gate 3
113CInputInput of gate 3
121YOutputTotem-pole output
131CInputInput of gate 1
14VCCPower+5 V supply

74LS11 truth table

Truth table for one AND gate of the 74LS11
ABCY
0000
0010
0100
0110
1000
1010
1100
1111

What the 74LS11 is used for

  • Three-literal product terms, such as the minterms of a three-variable function
  • Decoding one address out of eight

Electrical summary

Package14-pin DIP
Supply voltage5 V (4.75 V to 5.25 V)
Supply current, typical2.6 mA
Output typeTotem-pole — drives both high and low
Output current, lowsinks up to 8 mA
Output current, highsources up to 0.4 mA
Input current, low0.4 mA out of each input held low
Fan-outone output can drive about 20 LS inputs

Typical figures for quick reference when planning a board. Check the manufacturer's datasheet for limits and timing before committing a design. The 74HC11 and 74HCT11 use the same pin numbers, with different electrical values.

Try the 74LS11 on a breadboard

The Breadboard Simulator has the 74LS11 in its parts library: seat it on a virtual breadboard, wire it, power the board and probe the pins before you build the real thing.

Related chips

Build it before you build it.

Seat real 74-series chips on a virtual breadboard, wire them and probe every pin.